Chongqing Gathering Marine Equipment Co.,Ltd
Add to Cart
The Fuel Filter Water Separator adopts the combination of 1st stage,cone plate gravity and coalesce separation;2nd stage,fiber filter and 3rd stage,membrane permeation in order to make the treated bilge water to reach the requirements of discharge standard of the resolution of IMOMEPC.107(49).
Fuel Filter Water Separator Spare parts
1 Grease seal of feeding pump 2 sets
2 The 2nd filter core 2 sets
3 O-Ring of the separator 1 piece
4 O-Ring of the filter 1 piece
5 O-Ring of the flange 8pieces
6 Bilge level Probe 1 pcs
7 Seawater initial Filter 1 pcs
To comply with resolution IMO MEPC.107(49),on board,especially
ocean-going ships,they must be installed on board:15ppm bilge separator,15ppm
bilge alarm and automatic stopping device.The elementary diagram as follow:
Fuel Filter Water Separator is designed according to IMO MEPC107(49),offer CCS&EC APPROVAL CERTIFICATE | |||||||||
Type | HYC-0.25 | HYC-0.5 | HYC-1 | HYC-1.5 | HYC-2 | HYC-2.5 | HYC-3 | HYC-4 | HYC-5 |
Rating/max capacity(M3/H) | 0.25 | 0.5 | 1 | 1.5 | 2 | 2.5 | 3 | 4 | 5 |
Power of pump(KW) | 0.37 | 0.55 | 0.75 | 1.1 | 1.1 | 1.5 | 1.5 | 2.2 | 2.2 |
Electric heater power(KW) | 3 | 3 | option | option | option | option | option | option | option |
steam heater m2/kw | __ | __ | 0.033333333 | 1/45 | 2/60 | 2/75 | 3/90 | 4/120 | 5/150 |
15ppm bilge alarm | included | included | included | included | included | included | included | included | included |
base(channel steel)mm | #5 1000*600 | #6 1100*690 | #6 1050*1080 | #6 1100*1130 | #8 1900*1120 | #8 1900*1120 | #8 1700*1500 | #8 2280*1700 | #8 2590*2000 |
height(mm) | 1250 | 1460 | 1600 | 1650 | 1700 | 1900 | 1900 | 1900 | 1900 |
dry/wet weight(kg) | 300/450 | 600/800 | 800/860 | 1060/1810 | 1260/2260 | 1500/2800 | 1800/3200 | 2100/3900 | 2500/4600 |
applicable ship vessel | 1000 DWT Below | 1000~5000DWT | 5~10 KDWT | 10~30 KDWT | 30~50 KDWT | 50~100 KDWT | 100~200 KDWT | 100~300 KDWT | 300 KDWT above |