Chongqing Gathering Marine Equipment Co.,Ltd
Add to Cart
CCS/ECapproval
Hydraulic pressure:above 4000Mpa
Meet GA124-2004 and International Fire Safety Systems
Aluminized fire suit
DTXF heat insulation suit for fire fighting
Material Properties of the Cloth: fabric and an aluminum
Tearing strength: >= 32N
Stripping strength(N/30 mm): >= 9N
Length of flame retarded carbon (2s): <= 100 mm
Waterproof properties: >= 4000Pa
Heat Insulation Suit
The DTXF heat insulation suit for fire fighting is made with a flame-resisting fabric and an aluminum plated film compound material and no asbestos.
It consists of jacket, pants, gloves, hood and foot cover. It posses light weight, high strength and flame-resisting heat.
It can effectively protect the fire-fighter and the operator who is working at high temperature environment from flame and high temperature and meets the regulation of the standard for the performance and test method of heat insulation suit for fire-fighting.
The raise of inner temperature of the suit is not higher than 25 Degree Celsius after it is shined 30 seconds by a 10kw/m heat radiator.
The suit is certificated by CCS.
-Specification
Water proof | Hydraulic pressure≥4000Mpa |
Heat radiation resistance | Under the heat radiation with 10KW/M2,the increase of temperature on inner-surface not over 25°C,after irradiate for 30 seconds |
Fitted items | One suit fo partition fire clothes consists of flame-retarded coated with aluminium foil.(one headgear,one pair of gloves,one pair of feet cover,upper garment,a pair of trousers),one safety helmet,one set of fire boots. |